Three-dimensional macroscale assembly of Pd nanoclusters

Construction of macro-materials with highly oriented microstructures and well-connected interfaces between building blocks is significant for a variety of applications. However, it is still challenging to confine the desired structures. Thus, well-defined building blocks would be crucial to address this issue. Herein, we present a facile process based on 1.8 nm Pd nanoclusters (NCs) to achieve centimeter-size assemblages with aligned honeycomb structures, where the diameter of a single tubular moiety is ～4 μm. Layered and disordered porous assemblages were also obtained by modulating the temperature in this system. The reconciled interactions between the NCs were crucial to the assemblages. As a comparison, 14 nm Pd nanoparticles formed only aggregates. This work highlights the approach of confining the size of the building blocks in order to better control the assembly process and improve the stability of the structures.

Open image in new window

     

Towards quantum reversible ternary coded decimal adder

Quantum ternary logic is a promising emerging technology for the future quantum computing. Ternary reversible logic circuit design has potential advantages over the binary ones like its logarithmic reduction in the number of qudits. In reversible logic all computations are done in an invertible fashion. In this paper, we propose a new quantum reversible ternary half adder with quantum cost of only 7 and a new quantum ternary full adder with a quantum cost of only 14. We termed it QTFA. Then we propose 3-qutrit parallel adders. Two different structures are suggested: with and without input carry. Next, we propose quantum ternary coded decimal (TCD) detector circuits. Two different approaches are investigated: based on invalid numbers and based on valid numbers. Finally, we propose the quantum realization of TCD adder circuits. Also here, two approaches are discussed. Overall, the proposed reversible ternary full adder is the best between its counterparts comparing the figures of merits. The proposed 3-qutrit parallel adders are compared with the existing designs and the improvements are reported. On the other hand, this paper suggested the quantum reversible TCD adder designs for the first time. All the proposed designs are realized using macro-level ternary Toffoli gates which are built on the top of the ion-trap realizable ternary 1-qutrit gates and 2-qutrit Muthukrishnan–Stroud gates.     

Effects of silver nanoparticles on thermal properties of DBSA-doped polyaniline/PVC blends

Dodecylbenzenesulfonic acid (DBSA)-doped polyaniline (PAND) has been synthesized by redoping (PANDR) and aqueous polymerization (PANDA) methods. Silver nanoparticles were incorporated into the PANDR/tetrahydrofuran solution (PANDS) and then mixed with poly (vinyl chloride) (PVC) solution to prepare PANDS/PVC nanocomposites. In the present study, effects of silver nanoparticles on thermal properties of PAND/PVC blends have been investigated by employing thermal gravimetric analysis and heat flow microcalorimetry techniques. From these results it has been observed that the thermal stability of blends have increased by increasing the concentration of PAND in blends and nanocomposites. Addition of silver nanoparticles has suppressed the dehydrochlorination process and evolution/degradation of DBSA in PANDS/PVC nanocomposites. Presence of silver nanoparticles in PAND/PVC nanocomposites has reduced the mobility of PANI chains which in turn inhibited the transfer of free radicals formed during degradation of PAND and PVC through inter-chain reactions; hence, degradation process has been slowed down and thermal stability has been improved. Embedment of silver nanoparticles has reduced thermal weight loss corresponding to polymer degradation step and attains lower heat flow level in inert atmosphere for nanocomposites in contrast to those with no nanoparticles, thereby further improving thermal stability of nanocomposites. The heats of oxidation measured for blends and nanocomposites were independent of PAND/PVC blends composition.     

Energy-saving manufacturing technology for high-strength metal products

The use of heat-strengthened blanks to manufacture cold-deformed rebar and high-performance bolts permits the elimination of some operations in the production process, with corresponding energy savings. The complete research cycle includes the development of the technology, formulation of the documentation, and industrial trials.     

Geometric and structural strengthening of metal components

The geometric and structural strengthening of metal components is compared. Combining geometric and structural strengthening has a synergetic effect. A mathematical model of such combined strengthening is presented. Practical applications of combined geometric and structural strengthening are considered, in producing stronger metal components and in improving the performance of intermediate products in thermal and mechanical treatment.     

The influence of thermal processing on microstructure of sol–gel-derived SrSnO<Subscript>3</Subscript> thin films

Polycrystalline SrSnO₃ thin films were fabricated using the aqueous sol–gel process and deposited on the single crystal sapphire (R-Al₂O₃ and C-Al₂O₃) and Si substrates by spin coating technique. Two different processing of thermal treatment was explored to produce SrSnO₃ thin films of different porosity. The XRD analysis showed that polycrystalline films with preferential growth of SrSnO₃ (200) plane were obtained on C-Al₂O₃ substrates, while films deposited on R-Al₂O₃ demonstrated a random polycrystalline growth. FE-SEM analysis revealed that the higher porosity of SrSnO₃ films can be achieved by introducing additional thermal treatment step during the deposition procedure. The UV–Vis reflectance spectroscopy was used to study the effect of porosity on optical properties of the films.     

Second generation bioethanol (SGB) production potential in Turkey

Energy demand is increasing by the years. Population's needs and technological investments bring the new approach about generating energy. It is considered that fossil fuels will not be able to respond to all energy requirements after approximately 150 years. Turkey imports nearly all of its petroleum and so this causes major economic problems. Turkey, as a major cereal producer, has a huge potential to grow energy crops and other cellulosic biomaterials and can obtain plant's residues, which are suitable to produce second generation bioethanol (SGB). With domestic production, bioethanol can reduce the dependence of petroleum for Turkey, and greenhouse gas emissions can be decreased. Taking into account Turkey's situation in fuel–oil consumption, costliness of gasoline and environmentally hazardous specification of fossil fuels, bioethanol gains more importance and increases in value. Especially, SGB production is rising. Foodstuffs are valuable, and producing ethanol from directly those materials can cause a crisis in Turkey because lignocellulosic bioethanol is becoming prominent. In this regard, bioethanol production in Turkey becomes a major alternative to petroleum and may be a key to new and clean energy source. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of extraction methods on kinetic,chemical composition and antibacterial activities of Tunisian Thymus vulgaris. L. essential oil

The present study aims to compare two innovative extraction techniques: microwave-assisted hydrodistillation (MAHD) and solvent-free microwave extraction (SFME) through traditional extraction techniques: hydrodistillation (HD) and steam distillation (SD) for their efficiency in the extraction of the volatile compounds from Tunisian Thymus vulgaris leaves; the kinetic, yield, composition and antibacterial activities of the essential oil were assessed in vitro. Results show that the essential oils extracted by microwaves were quantitatively (yield) similar to those obtained through the conventional methods, but qualitatively, essential oils analysed by gas chromatography–mass spectrometry (GC–MS) presented 17, 11, 11 and 8 compounds obtained through SFME, MAHD, SD and HD, respectively, mostly consisting of carvacrol (89.24–41.17%), followed by γ-terpinene (11.37–1.37%) and para-cymene (27.95–2.05%). The essential oils were screened for antibacterial activity against 5 microorganisms. All essential oils obtained by studied extraction methods showed the same resistance against Gram (?) and Gram (+) bacteria. The SFME method gave the best results: rapid kinetic of extraction (30 min vs. 35 min for MAHD, 120 min for SD, and 180 min for HD), less energy saving and cleanest process.     

Banana peel: an effective biosorbent for aflatoxins

This work reports the application of banana peel as a novel bioadsorbent for in vitro removal of five mycotoxins (aflatoxins (AFB1, AFB2, AFG1, AFG2) and ochratoxin A). The effect of operational parameters including initial pH, adsorbent dose, contact time and temperature were studied in batch adsorption experiments. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pH_pzc) analysis were used to characterise the adsorbent material. Aflatoxins’ adsorption equilibrium was achieved in 15 min, with highest adsorption at alkaline pH (6–8), while ochratoxin has not shown any significant adsorption due to surface charge repulsion. The experimental equilibrium data were tested by Langmuir, Freundlich and Hill isotherms. The Langmuir isotherm was found to be the best fitted model for aflatoxins, and the maximum monolayer coverage (Q₀) was determined to be 8.4, 9.5, 0.4 and 1.1 ng mg^?1 for AFB1, AFB2, AFG1 and AFG2 respectively. Thermodynamic parameters including changes in free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the four aflatoxins. Free energy change and enthalpy change demonstrated that the adsorption process was exothermic and spontaneous. Adsorption and desorption study at different pH further demonstrated that the sorption of toxins was strong enough to sustain pH changes that would be experienced in the gastrointestinal tract. This study suggests that biosorption of aflatoxins by dried banana peel may be an effective low-cost decontamination method for incorporation in animal feed diets.